The motor of the cumulative compressor run timer is permitted to operate only when the compressor is in operation and the ____.
a. thermostat is closed
b. fan is in low speed
c. expansion valve is closed
d. dryer is saturated
a. thermostat is closed
You might also like to view...
As the diameter of the filler wire is decreased, the heat absorbing effect ____, and the molten weld pool becomes ____.
A. increases, deeper B. decreases, wider C. decreases, deeper D. increases, shallower
Digital quantities have values that are specified as 1 or 0, HIGH or LOW, etc. The voltage values associated with these digital quantities fall within specified limits. On the other hand, analog values for physical process control may be any value over a wide range of values, with each different value having a different meaning. As a result:
A) digital computers are unable to monitor or control physical analog operations with any degree of accuracy or certainty. B) digital computers are unable to monitor analog physical values regardless of the interfacing techniques used to make the two systems compatible. C) digital computers have the capability to monitor only those analog physical operations that fall within the specified ranges of digital HIGH and LOW voltage levels. D) digital computers that monitor or control analog physical values must have an accurate means of transforming analog data to meaningful digital data and vice-versa.
Use Data Sheet 5. Refer to the figure. If Vertical = 60", Start = 30" what is the c-c measurement of K?
Fill in the blank(s) with the appropriate word(s).
Improved turbine blade design increases the efficiency of the turbi?ne by 6.5%. If the wind has 1,400 kW of power, what is the increase in output power?
Fill in the blank(s) with the appropriate word(s).