Shift registers are used primarily for ________ and ________ of binary data
Fill in the blank(s) with correct word
storage, shifting
You might also like to view...
A chilled water system should be insulated _____.
a. for heat conservation b. with a vapor retarder c. for personal protection d. only at the chillers
A copper roof is being installed on a 300 ft tall building. A copper tile is dropped, and falls to the ground. Assume that there is no air resistance, and that the temperature of the copper tile stays constant (at 80oF) during its fall to the ground. When the copper tile hits the ground, all of its kinetic energy is converted into thermal energy, with no heat lost in the process. What is the temperature of the copper tile after it comes to rest on the ground?
Given: Cu; T1 = 80oF; z1 = 300 ft; z2 = 0 m Assume: Q = W = ?KE = 0 (the initial and final velocities are both 0 – the energy change in the fall is potential energy); The copper is an incompressible substance with constant specific heats: c = 0.092 Btu/lbm-R What will be an ideal response?
Which of the following is NOT a characteristic of conventional brake fluid?
A) Removes paint if spilled on vehicle surfaces B) Is clear or amber in color C) Lasts the life of the vehicle unless there is a leak D) Absorbs moisture from the air
Examining the radiator, shroud, and shutters to make sure they are structurally sound and free from dents, damage, or ice is part of checking the
A. steering system B. cooling system C. braking system D. exhaust system