Answer the following statement(s) true (T) or false (F)
1. Cross connections between an individual water supply system and other individual or public water supply systems are prohibited.
2. There are several jurisdictions where licensing programs do not include licensed well drillers and pump installers.
3. Hydropneumatic tanks shall have a working pressure rating that does not exceed the maximum required system pressure.
4. Well casings, curbs, and pitless adapters shall terminate no fewer than 8 inches above the finished ground surface or pump house floor and at least 24 inches above the maximum high-water level where flooding occurs.
5. Systems, which have vents, shall be of adequate size to allow equalization of air pressure in the well and shall not be less than 3/4 inch in diameter.
1. True.
2. True.
3. False.
4. True.
5. False.
You might also like to view...
Portable oxyfuel track burners can be used for _____.
a. stationary cutting, but not bevel cutting b. straight-line cutting and bevel cutting c. movable cutting, but not straight-line cutting d. both drag cutting and kerfless cutting
Laser equipment is ____ most other welding or cutting power supplies.
A. larger than B. smaller than C. significantly smaller than D. about the same size as
The figure below represents what type of circuit?
What will be an ideal response?
Compute the support reactions and the maximum tension in the main cable in Figure P6.5. The hangers can be assumed to provide a simple support for the suspended beams.
