Name the standard that is conveyed by the American Society of Mechanical Engineers document for lines and lettering.
What will be an ideal response?
ASME Y14.2, Line Conventions and Lettering.
You might also like to view...
____ (sometimes referred to as avoidance) is the risk control strategy that attempts to prevent the exploitation of a vulnerability.
A. Acceptance B. Transference C. Defense D. Mitigation
Southern slaves ran away to Union camps at the rate of
A. one in three. B. one in four. C. one in five. D. one in six. E. one in seven.
Answer the following statement(s) true (T) or false (F)
1. Instrument transformers are used with instruments and relays to measure and control ac circuits. 2. Small and inexpensive devices are required to measure high voltages and currents directly. 3. A nearly constant voltage can be maintained on long distribution circuits by compensating for the voltage losses due to varying load conditions. 4. The construction of the three-phase induction voltage regulator is similar to that of the single-phase regulator. 5. When the three-phase stationary primary windings are energized, a uniform magnetic field is set up inside the stator core.
The output of an oil furnace ignition transformer can be tested
A) With a special high voltage probe that reduces the voltage to a level a standard meter can read B) Using the microamp scale on a multi-meter C) Using a volt meter that can read 1000 volts DC D) Using a volt meter that can read 1000 volts AC