_______________ chute plates are placed in close proximity to where the contacts open, and they use both mass and space properties to help extinguish the electrical arc before it becomes too large.
Fill in the blank(s) with the appropriate word(s).
Arc
You might also like to view...
ECMs should be replaced if their motor winding resistance to ground is less than _____.
a. 1,000 ohms per volt b. infinity c. 100,000 ohms d. 500,000 ohms
What system operating characteristics would you expect from a system that has a TEV with a loose sensing bulb?
What will be an ideal response?
When flushing the system, you should:
A) Flush through the entire system through the service valves. B) Always flush through the accumulator to remove accumulated debris. C) Flush through the compressor first. D) Disconnect the lines and flush through them separately.
In a series circuit, the total _____ is equal to the sum of the individual resistors.
A. current B. amperage C. voltage D. resistance