Specific features of an object are commonly left unsectioned in a sectional view if the cutting plane line passes through the feature and parallel to the feature axis.
Answer the following statement true (T) or false (F)
True
You might also like to view...
What is differential pressure?
What will be an ideal response?
A 30-ohm resistor is connected to a 15-V battery. What is the current in the circuit?
a. 0.5 A b. 1.0 A c. 1.5 A d. 2.0 A
On systems with three access values, the vacuum pump should be connected to:
A) The evaporator coil, only if the Schrader value has been removed. B) The compressor. C) The middle port of a standard three-port manifold. D) The suction line service valve.
A requirement for an area in which a non-vented high-intensity infrared heater is to be installed is _____
a. the area must be well ventilated b. all ceilings must be at least 20' high c. no combustible material can be within 15' of the heater d. no vehicles can be parked under the heater