Spools are normally numbered in order according to the _____.
a. lengths of the spools
b. direction of flow through the system
c. sequence in which the spools should be fabricated
d. elevation of the pipeline
b. direction of flow through the system
You might also like to view...
In humid regions repeat applications of limestone are needed after a few years primarily because of ________
A) increased rates of formation of carbonic acid (H2CO3) B) increases in phosphate fertilization C) increases in soil acidity from acid rain D) the release of aluminum ions from the structure of silicate clays E) the annual loss of calcium and magnesium in drainage waters
During removal of a vacuum booster, the master cylinder should be:
A. removed completely from the vehicle. B. removed from the booster and moved aside. C. disconnected from the lines and removed with the booster. D. disconnected from the firewall.
A voltage divider bias circuit with a VCC of 12 V has an hFE of 60. The emitter resistor (RE) is rated at 1.2 k? and the collector resistor (RC) has a value of 3.3 k?. Biasing resistor R1, from VCC to the transistor base, is 22 k?. Biasing resistor R2, from the transistor base to ground, is 6.8 k?. The voltage at the base of the transistor is
A) 12 V B) 8.30 V C) 3.70 V D) 2.83 V
The vent system allows a continuous flow of air through the system so gases and odors can dissipate and bacteria do not have an opportunity to grow.
Answer the following statement true (T) or false (F)