In a variable reluctance motor, if the salient poles are 30 degrees apart and the rotor poles are 45 degrees apart, its step angle is __________ degrees.
A. 15
B. 30
C. 45
D. 75
Answer: A
You might also like to view...
?During a compression test, remove all of the _____ _____ so the starter can crank the engine easily.
What will be an ideal response?
The resistance viewed from the output terminal to ground is called
A) output impedance B) offset impedance C) bias impedance D) all of the above
A "floating" TTL input is an:
A) unused input that is tied to ground. B) unused input that is tied to Vcc through a 1-k? resistor. C) unused input that is tied to used inputs. D) unused input that is not connected.
A commonly used floor system in poured-in-place concrete, the ____ combines a thinner slab with concurrently poured joists or ribs to create a floor system very similar to a precast concrete double-tee system.
A. one-way ribbed system B. one-way solid slab-and-beam system C. two-way solid slab-and-beam floor system D. two-way flat-plate floor system