A floor-plan sketch or diagram of a structure shows:
A. a detailed view of the construction features of each floor and fire protection features.
B. an outline of each floor of the building, including walls, partitions, openings, fire protection features, and areas of life hazard.
C. a cutaway view of a particular portion of a building in relation to streets and hydrants.
D. the building and grounds as they are actually seen in depth by the eye.
Answer: B. an outline of each floor of the building, including walls, partitions, openings, fire protection features, and areas of life hazard.
You might also like to view...
?How is a welding tip seal checked for a leak?
A. ?Place your finger over the end of the tip and spray the fitting with a leak detector. B. ?Once the tip is tight, use a wrench to make ½ additional turn. C. ?Put the cutting head in the cooling tank and look for bubbles. D. ?Clean the fitting with a dry clean rag, and tighten the fitting with a 12 in. adjustable wrench.
bipolar BLDC motor is used to drive a unidirectional torque of 300 Nm. The voltage of the dc source is 400 V, k? = 1.0 Vs, and the armature resistance of the motor is 1.0 ?. Compute the modulation factor for the following cases:
a. Motor operation at 600 rpm b. Holding c. Plugging at 300 rpm in the reverse direction Also, compute the armature current in all of the above cases.
A piezoresistive sensor changes in ____ value as the pressure applied to the sensing material changes.
A. capacitance B. conduction C. resistance D. photoconductive
________ tiles are used to cover hip lines, gable ends along the rakes, and ridge lines
A) Edged B) Accessory C) Flat D) Field