All of the following are types of brake fade EXCEPT:
A. gas.
B. drum.
C. mechanical.
D. lining.
Answer: B
You might also like to view...
What is used to control plunger effective stroke in a sleeve metering, rotary distributor pump?
A. control sleeve B. cam plate C. metering pressure D. engine rpm
An air conditioning system employing chilled water reset __________________
A. the chilled water temperature set-point is raised during high load periods B. the chilled water temperature set-point is lowered during high load periods C. is not limited by the rise in chilled water temperature leaving the evaporator D. Both B and C
A suction superheat measurement higher than the manufacturer's recommended superheat setting indicates that:
A) The system is operating even better than the manufacturer's design. B) Too little refrigerant is being fed into the evaporator. C) The system is operating correctly. D) Too much refrigerant is being fed into the evaporator.
A normally open valve that is positioned after the receiver in a pneumatic system is called a pressure ________
A) filter B) louver C) compressor D) regulator