The hose and nozzle in a standpipe system must be accessible at all times. The hose outlets are located so that every part of the building may be reached with a hose stream. The maximum length of a single hoseline is

A. 100 feet
B. 125 feet
C. 75 feet
D. 50 feet


Answer: B. 125 feet

Trades & Technology

You might also like to view...

Who should process technicians report violations to?

A. OSHA B. EPA C. Supervisor D. Plant ownership

Trades & Technology

Brakes that drag or fail to release can be caused by a _________

A) Leaking secondary cup B) Plugged vent port (compensating port) C) Leaking primary cup D) Failure of the residual pressure (check) valve

Trades & Technology

What is the purpose of a filter status differential pressure switch?

What will be an ideal response?

Trades & Technology

An incandescent lightbulb rated at 100 W will dissipate 100 W as heat and light when connected across a 110-V ideal voltage source. If three of these bulbs are connected in series across the same source, determine the power each bulb will dissipate.

Find: The power dissipated by a series of three light bulbs connected to the nominal voltage. Assumptions: The resistance of each bulb doesn’t vary when connected in series.

Trades & Technology