____________________ is the peak force that can be applied to the shaft of an energized motor at standstill without causing it to move.
Fill in the blank(s) with the appropriate word(s).
Holding torque
You might also like to view...
The PCM has the option of turning the MIL off when the diagnostic test which caused the MIL to light passes for:
A. Two consecutive trips B. Three consecutive trips C. Four consecutive trips D. Five consecutive trips
Refer to the figure below. On an HCFC-22 system, liquid line pressure is 202 psig (1,393 kPa) and the measured liquid line temperature is 100°F (37.8°C). The subcooling is _____.
a. 1°F (0.6°C)
b. 2°F (1.1°C)
c. 4°F (2.2°C)
d. 8°F (4.4°C)
Pickling preserves food because bacteria cannot survive in the liquid due to the high _____ content
A) oxygen B) acid C) moisture D) heat
Standards of interest to drafters and designers are contained in the "D" series of ANSI standards.
Answer the following statement true (T) or false (F)