What is the floating fastener assembly formula?
What will be an ideal response?
ANS:
The floating fastener formula is:
T= H – F
Where:
T = position tolerance zone diameter (for each part)
H = MMC of the clearance hole
F = MMC of the fastener
You might also like to view...
With intersecting angular surfaces, Angle B is the given angle in the ____________________ view (profile plane) in relation to the horizontal plane.
Fill in the blank(s) with the appropriate word(s).
The capacitor-start, ____________________ motor features the starting winding and capacitor connected in the circuit at all times.
Fill in the blank(s) with the appropriate word(s).
Winter blend gasoline ________
A) Can cause engine driveability problems if used during warm weather B) Has a higher RVP C) Vaporizes more easily than summer blend gasoline D) All of the above
?How much energy is needed from the circulator in a closed-loop hydronic system?
A. ?It depends on the elevation of the system. B. ?It depends on the weight of the fluid. C. ?Enough is needed to sustain a flow rate of 2 to 4 gallons per minute. D. ?Enough is needed to replace the energy of head loss.