How would you remove the cam drive assembly on a push rod engine?
What will be an ideal response?
Unbolt the cam sprocket and slide or pry it off the cam. Then remove the chain. Reinstall the sprocket and tighten one bolt finger tight. The sprocket will be used to help remove the cam later.
You might also like to view...
A propagation facility should contain three basic areas. These are ________, ________, and ________.
Fill in the blank(s) with the appropriate word(s).
____ are languid, suggesting a steamy, tropical jungle, a tangle of plant growth, or a cascading
waterfall.
a. Vertical lines c. Diagonal lines b. Hanging lines d. Waving lines
When a key is pressed in the 8051, the instruction MOV P0, 0F0H will
A) drive the columns LOW and float the rows. B) drive the rows HIGH and float the columns. C) drive the columns HIGH and float the rows. D) drive the rows LOW and float the columns.
When removing the rotating element from the lower casing, after attaching a lifting sling, and while using a hoist with slight pressure, use ________ to unseat shaft rings and bushings from the lower casing
A) your hands B) a pry bar C) a hammer and chisel D) compressed air