Answer the following statement(s) true (T) or false (F)
You may cut or notch the flanges of wood I-beams wherever necessary.
ANS: F
You might also like to view...
If plywood panels are used to build a slipforming form, a small gap should be left between panels to allow for _____.
a. pressure equalization b. shrinkage c. swelling d. water runoff
One-time-use forms for round columns are made from _____.
a. fiber b. plastic c. fiberglass d. plywood
Technician A says that after replacing an injector spring on a hydraulic multi-orifii injector, it is good practice to set NOP 75 psi above specification. Technician B says that any time a hydraulic nozzle assembly is reassembled after bench testing, it is good practice to set NOP 150 psi above specification. Who is right?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
A ____ must be correctly applied so that it is strong enough to hold the assembly and still not interfere with the finished welding.?
A. ?forged weld B. ?stick weld C. ?tack weld D. ?rod weld