Arcs are usually dimensioned using ______________
a. A general note
b. The diameter
c. The chord
d. The circumference
e. The radius
e
You might also like to view...
Referring to the figure shown below, Technician A says that an open CAN + circuit between the engine ECM and the body ECU could cause the automatic transmission shift points to be affected. Technician B says that an open CAN + circuit in the ABS ECU stub could cause the ABS warning lamp to be illuminated in the instrument cluster. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
Answer the following statement(s) true (T) or false (F)
1. Matter can be described as any substance that occupies space and has weight. 2. Four-stroke engines are much simpler in design than two-stroke engines. 3. The purpose of the two-stroke crankcase is the same as that of the four-stroke crankcase—to house and support the major engine components. 4. With a cylinder reed valve engine, the intake port is always closed. 5. The rotary valve engine design is seldom used in today’s power equipment engines because of its size.
A(n) ____________________ allows the homeowner to monitor power use over time and confirm the effectiveness of energy efficiency measures as well as efforts to reduce peak demand usage.
Fill in the blank(s) with the appropriate word(s).
During a crane lifting operation near energized power lines, it is important to _____
a. use steel tag lines for load control b. place the signal person behind the crane for safety c. have the signal person in constant contact with the crane operator d. have many workers standing by to help in case there is an accident