Static electricity can build up on the technician's body. Before handling electronic components discharge the static charge by _______
A) Touching a ground point on the vehicle B) Sitting on the drop light cord
C) Holding a large metal flashlight D) Gripping the steering wheel
A
You might also like to view...
Fuel ____________________ is indicated by dry, black, fluffy carbon deposits on the spark plug electrodes
Fill in the blank(s) with the appropriate word(s).
A series of ASME SA-193 carbon steel bolts are bolted to the upper surface of a metal plate. The bottom surface of the plate is subjected to a uniform heat flux of 5 kW/m2. The upper surface of the plate is exposed to ambient air with a temperature of 30°C and a convection heat transfer coefficient of 10 W/m2•K. The ASME Boiler and Pressure Vessel Code (ASME BPVC.IV-2015, HF-300) limits the maximum allowable use temperature to 260°C for the SA-193 bolts. Determine whether the use of these SA-193 bolts complies with the ASME code under these conditions. If the temperature of the bolts exceeds the maximum allowable use temperature of the ASME code, discuss a possible solution to lower the temperature of the bolts.
What will be an ideal response?
The addresses of the routines that handle interrupts and exceptions are stored in a special region of memory called the stack
Indicate whether the statement is true or false
Steel is approximately
a. two times stiffer than aluminum alloys b. four times stiffer than aluminum alloys c. three times stiffer than aluminum alloys d. ten times stiffer than aluminum alloys