When joining grooved pipe, which step is performed immediately after the housing is installed?
a. Apply lubricant to the gasket.
b. Install the gasket over the pipe end.
c. Center the gasket between the grooves on each pipe.
d. Insert the remaining bolt and nut.
d
You might also like to view...
Technician A says that the more rapid the decrease in the current flow through an inductor, the higher the amplitude of the reverse-polarity voltage that is developed across the inductor. Technician B says that an oscilloscope can be used to display a changing voltage with respect to time. Who is correct?
A. A only B. B only C. Both A and B D. Neither A nor B
The fuel pressure drops rapidly when the engine is turned off. Technician A says that one or more injectors could be leaking. Technician B says that a defective check valve in the fuel pump could be the cause. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
Which of the following motors is used where the required starting torque is high and speed control is
desirable? a. Brushless b. Compound c. Series d. Shunt
Technician A says that a self-test DTC identifies a hard fault. Technician B says that a memory DTC always represents a soft fault. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B