Technician A says that a discharged battery (lower-than-normal battery voltage) can cause solenoid clicking. Technician B says that a discharged battery or dirty (corroded) battery cables can cause solenoid clicking. Which technician is correct?

A) Technician A only
B) Technician B only
C) Both technicians
D) Neither technician


B

Trades & Technology

You might also like to view...

Equipment intended to interrupt current at fault levels must have an interrupting rating at nominal circuit voltage that is _____.

a. equal to the current available at the line terminals of the equipment b. 125% of the current available at the line terminals of the equipment c. 150% of the current available at the line terminals of the equipment d. 200% of the current available at the line terminals of the equipment

Trades & Technology

Most fatal refrigeration accidents have occurred due to which type of refrigerant?

What will be an ideal response?

Trades & Technology

Technician A states rail pressure limiter valves limit maximum rail pressure and are calibrated to trip at pressures slightly above the peak rail pressure. Technician B states high pressure fuel lines are protected by the rail pressure limiter valve and are designed only to withstand pressures at or below the trip pressure. Who is correct?

A. Technician A only. B. Technician B only. C. Both A and B. D. Neither A nor B

Trades & Technology

Sometimes referred to as the shank, that portion of a screw shaft that is left unthreaded.

What will be an ideal response?

Trades & Technology