In a simple half-wave rectifier circuit, a diode is installed in series with the AC input signal and is forward-biased and reversed-biased every half cycle of the AC signal
Indicate whether the statement is true or false
FALSE
You might also like to view...
Briefly describe the metal connections that may be used to make up a steel frame.
What will be an ideal response?
The time from the beginning of a read cycle to the point when the data output is valid is called
A) hold time. B) access time. C) cycle time. D) propagation delay.
Technician A says that a fracture in the auxiliary section housing could be caused by seized clutch release bearing. Technician B says that a fracture in the auxiliary section housing could be caused by a driveline misalignment problem. Who is correct?
A. Technician A only B. Technician B only C. Both A and B D. Neither A nor B
You are checking your steering and exhaust systems in your pre-trip inspection which of these problems should be fixed before the vehicle is driven
a. Tires of mismatched sizes should not be used on the same vehicle. b. Dual tires should be touching each other. c. 2/32 inch tread depth is safe for the front tires. d. Radial and bias-ply tires can be used together on the same vehicle.