The electrodynamic shaker shown in Figure P18.53 is used to perform vibration testing of an electronic circuit. The circuit is placed on a test table with mass m, and is assumed to have negligible mass when compared to the table. The test consists of shaking the circuit at the frequency ? = 2?(100) rad/s.
a. Write the dynamic equations for the shaker. Clearly indicate system input(s) and output(s).
b. Find the frequency response function of the table acceleration in response to the applied voltage.
c. Given the following parameter values:
B = 200 Wb/m2 l = 5 m k = 100 N/m
m = 0.2 kg b = 5 N-s/m
L = 8 mH R = 0.5 ?
Determine the peak amplitude of the sinusoidal voltage VS required to generate an acceleration of 5g
(49 m/s2) under the stated test conditions.
Analysis:
You might also like to view...
Heating, lighting, and rent are good examples of ________.
A) Variable expenses B) Overhead expenses C) Net profit D) Gross profit
Find the number of sides of a regular polygon having an interior angle of 120°.
Fill in the blank(s) with the appropriate word(s).
Using solar potential maps from NREL, the total energy available, measured in ____, can be determined for a specific location.
A. kWh/m2/hour B. kWh/m2/day C. m2/kWh/day D. kWh/m/hour
On-site changes in the original design that are made during construction are documented in the _____.
a. as-built drawings b. takeoff sheet c. project schedule d. job specifications