Which of the following best explains why some OEMs state that the high pressure pipes used on CR systems should not be re-used?
A. the line nut hex is easily rounded out
B. the engine warranty will voided
C. it is more profitable to the OEM to sell as many parts as possible
D. the seats deform to seal when initially torqued
Answer: D
You might also like to view...
All of the following statements are true EXCEPT:
A. one way to prevent torque steer is to make the longer axle shaft out of larger diameter tubing. B. the trend is to have halfshafts of different lengths on both sides of the vehicle. C. CV joint boots are attached to the axle and stub shafts with plastic or steel bands or straps. D. boots are made of natural rubber, neoprene, silicone, or urethane.
The outfeed table on a jointer should be ____________________ than the infeed table
Fill in the blank(s) with the appropriate word(s).
________ combines PM and AM to produce a four-bit per baud signal
Fill in the blank(s) with correct word
When looking for information on physical and chemical properties, the section to look at in a SDS is section:
A) 8. B) 7. C) 6. D) 9.