The two methods used by an 8085 program to access input/output devices are
A) Memory Mapped I/O and Program Mapped I/O.
B) Standard I/O and Program I/O.
C) Memory Mapped I/O and Standard I/O.
D) Memory I/O and Program I/O.
C
You might also like to view...
What has generally been the impact of heavy grazing compared to moderate grazing on net financial returns from range livestock production?
A) Returns have been higher from moderate grazing. B) Returns have been higher from heavy grazing. C) There has been no difference.
A noise and a pull toward one side during braking is a common symptom or a worn or defective ________
A) Strut rod bushing B) Shock absorber C) Track rod bushing D) Stabilizer bar link
The voltage output of a zirconia oxygen sensor when the exhaust stream is lean (excess oxygen) is ________
A) About in the middle of the voltage range B) Relatively high (close to 1 volt) C) Relatively low (close to 0 volt) D) Either A or B, depending on atmospheric pressure
A pipe size should be selected that keeps the average flow velocity between ____ ft./sec.
a. .5 and .75 b. 1 and 2 c. 1 and 3 d. 2 and 4