What shop tools can be used to test inlet restriction on primary fuel filters?
A. Negative pressure gauge or manometer.
B. Fuel system scan tool.
C. Master pyrometer.
D. Positive pressure gauge.
Answer: A
You might also like to view...
Explain the primary purpose of the receiver.
What will be an ideal response?
Flux is a term given to any ____ used to clean metal
a. chemical c. bead b. energy d. tool
To activate or learn a direct pressure sensor, what does the service technician need to do?
A) Enter learn mode and use a magnet B) Use a handheld tester C) Enter learn mode and decrease inflation pressure D) Any of the above, depending on the vehicle and system
The pump should be located between the tower and the chiller so that
A) The water is "pulled" from the condenser and "pushed" into the tower B) The inlet for the sump can be piped to both the sump and the condenser C) The water is "pulled" from the tower and "pushed" through the condenser D) The inlet for the pump is above the water level in the sump