Describe the reference arrow method for sectional view identification.
What will be an ideal response?
When using the reference arrow method for identifying sections, arrowheads point toward each end of the cutting-plane line and the section identification letters are placed at the ends of the cutting plane line. The view title is placed above the removed section when using the removed arrow method.
You might also like to view...
A fluid exchange machine is designed to replace ________.
A) Only the ATF in the torque converter B) All of the old ATF C) 1/4 to 1/3 of the old ATF D) All of the old ATF except for that in the filter mesh
When soldering 1-1/2" tubing in a horizontal position, you should _____
A) start feeding solder near the bottom and work up B) start feeding solder at the top and work down C) turn the assembly to the vertical position first D) feed the solder from a single point
Name a cold forming process used to roughen a cylindrical or flat surface uniformly with a diamond or straight pattern, often used on handles or other gripping surfaces, and can be used to establish an interference (press) fit between two mating parts.
What will be an ideal response?
Is the sample median always equal to one of the values in the sample? If so, explain why. If not, give an example.
What will be an ideal response?