After the band has been welded:
A) The teeth across the weld should be closer together for extra strength
B) Any tooth spacing will be acceptable
C) Tooth spacing across the weld should be the same as the rest of the band
D) A small space should exist between the teeth across the weld
C
You might also like to view...
Building control circuit wiring that is both powered and controlled by the fire alarm system is governed by _____.
a. NEC Article 725 b. NEC Article 760 c. NEC Article 770 d. NEC Article 800
The U.S. _____ Service manages the federal timberlands
a. Forest c. Timber b. Tree d. Parks
Technician A says that a MAP sensor can be tested by visual inspection, testing the output using a digital meter, or a scan tool. Technician B says that a light engine load results in low intake manifold vacuum and a high MAP sensor signal voltage. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
When coolant is used, it will:
A) Lengthen the life of the tool B) Shorten the life of the tool C) Increase the power requirement D) Do none of the above