Which of the following leads to cleanup costs?
A. Overfilling
B. Pulling a vacuum on a tank while emptying
C. Putting wrong or off-spec material in a vessel
D. All of the above
A. Incorrect. Overfilling, pulling a vacuum on a tank, and putting wrong or off-spec material in a vessel can all lead to cleanup costs.
B. Incorrect. Overfilling, pulling a vacuum on a tank, and putting wrong or off-spec material in a vessel can all lead to cleanup costs.
C. Incorrect. Overfilling, pulling a vacuum on a tank, and putting wrong or off-spec material in a vessel can all lead to cleanup costs.
D. Correct. Overfilling, pulling a vacuum on a tank, and putting wrong or off-spec material in a vessel can all lead to cleanup costs.
You might also like to view...
The core missions of a ____ system include keeping the building climate within a specified range, providing lighting based on established schedules, and monitoring system performance and device failures.
A. BAS B. Doppler Effect C. HVAC D. CCTV
What is the standard thickness of masonry mortar?
What will be an ideal response?
Which of the following is NOT one of the terminals on an analog joystick?
A. signal voltage B. ground C. V-Ref D. supply
What could be the problem if a noid light remains on (does not flash) with the engine cranking?
A) Short to ground in the injector ground circuit, or defective PCM. B) High injector resistance. C) Blown injector fuse. D) Low system voltage.