The heater core:
A. Is located on the firewall of the truck.
B. Has hot engine coolant circulated through it depending upon position of heater control valve.
C. Is usually contained in an insulated case alongside the evaporator and blower motor.
D. All of the above statements are correct
Answer: D
You might also like to view...
A pipe operates at steady-state, steady-flow conditions. R-134a enters the pipe at 120oF and 60 psia, and exits at 50 psia and a quality of 0.90. The volumetric flow rate of the R-134a entering the pipe is 1.75 ft3/s. Assume that there are no work interactions. (a) Determine the heat transfer rate to or from the pipe. (b) Using your equations, plot the rate of heat transfer for the same inlet conditions and outlet pressure, but for outlet qualities varying between 0.0 and 1.0.
Given: R-134a; T1 = 120oF; P1 = 60 psia; P2 = 50 psia; x2 = 0.90; V?1 = 1.75 ft3/s Steady-state, steady-flow; (Inlet = State 1; Outlet = State 2) Assume: W?= 0 ; neglect changes in kinetic and potential energy What will be an ideal response?
When adding refrigerant in vapor form to an operating refrigeration system, the refrigerant must be added to the low-pressure side of the system.
Answer the following statement true (T) or false (F)
Identify the net cash flows shown below as either conventional or nonconventional.
What will be an ideal response?
When a multimeter has three input terminal jacks, which jack is always used?
a. Common. b. Voltage. c. Amperage. d. Frequency.