What is a typical geartrain backlash specification?
A. 0.002mm (0.00007in)
B. 1.0mm (0.039in)
C. 6.0mm (0.24in)
D. 0.200mm (0.008in)
Answer: D
You might also like to view...
When JJ and Sons was awarded a contract to pour a skyscraper’s foundation, the father had to choose between two pieces of equipment needed to supplement pumping of concrete into foundation settings. Estimates are below. Both machines have an estimated 7-year useful life; however, MACRS depreciation is over a 5-year recovery period. The effective tax rate is 40%, and the after-tax MARR is 8% per year. Your father asked you, one of the sons, to recommend one machine. (a) Perform the analysis by spreadsheet using after-tax PW analysis, and (b) plot the CFAT curves.
 FIGURE 1.png)
The element most often involved in oxidation reactions as minerals weather is ________
A) copper B) magnesium C) silicon D) iron E) aluminum
Which type of head works well for driving with a drill and magnetic nut driver?
A) Round head with straight slot B) Hex head C) Pan head with phillips slot D) Countersunk head with straight slot
In analog data transmission, frequencies of 0 to 300 Hz and 3300 to 4000 Hz are reserved as ________, used to ensure that the data transmission will not interfere with other signals
Fill in the blank(s) with correct word