What type of weld is used if one pipe is small enough to fit snugly inside the other?

A) Glue weld
B) Butt weld
C) Brazed weld
D) Socket weld


Answer: D
Explanation: A) Incorrect. The types of welds used are a butt weld or a socket weld.
B) Incorrect. A butt weld is used if the pipes are the same diameter.
C) Incorrect. The types of welds used are a butt weld or a socket weld.
D) Correct. A socket weld is used if one pipe is small enough to fit snugly inside the other.

Trades & Technology

You might also like to view...

Which of the following shafts or chases travel vertically and carry grease vapors to the outside of the building, often utilizing in-line fans or fans on the roof?

A. Pipe chases B. Smoke vents C. Grease ducts D. Refuse chutes

Trades & Technology

PTAC units are:

A) Partial temporary air-conditioning units. B) Partial trajectory air-conditioning units. C) Packaged temporary air-conditioning units. D) Packaged terminal air-conditioning units.

Trades & Technology

When preparing a steam boiler for wet storage, the boiler is _____

a. valved off from the remainder of the system b. filled with treated water below its normal water line c. filled with treated water to its normal water line d. valved open to the remainder of the system

Trades & Technology

ASE-Style Multiple Choice The spray coat that is normally used on the boundary of spot repair areas so that a color difference is not noticeable is MOST-Likely:

A. a blend coat B. a medium wet coat C. a banding coat D. a full wet coat

Trades & Technology