?What is used to remove the material from a hole being drilled with a laser?
A. ?A jet of clean dry compressed air blasts the molten metal out of the hole.
B. ?Laser drilling is always done overhead so the molten metal will run out of the hole.
C. ?The intense heat vaporizes the spot with enough force to thrust the material out.
D. ?The laser is hot enough so that it passes through the molten metal until the hole is completed and then the molten metal drips out.
Answer: C
You might also like to view...
With the funnellette, the flared part is held in place while the portion sticking through the board is ____________________ to hold it in place.
Fill in the blank(s) with the appropriate word(s).
Type ____ mortar is a medium-strength mortar with a compressive strength of 750 psi.
A. M B. N C. O D. S
To prevent cave-ins, sloped or tiered walls may be used for trenches less than _____.
a. 10' deep b. 15' deep c. 20' deep d. 25' deep
________ the time base setting reduces the number of samples per second
A) Dividing B) Increasing C) Decreasing D) None of these