En la Figura 2, una corriente de _____ amperios fluiría por el circuito.
a. 2
b. 5,21
c. 3,24
d. 4,14
d. 4,14
You might also like to view...
A solar water heater system heated 67.4325 gallons of wat?er during 9.25 hours one day. What is the rate of water heating by this system in gallons per hour?
Fill in the blank(s) with the appropriate word(s).
Explain why the masonry industry recommends the use of the weakest mortar that will give the required performance.
What will be an ideal response?
Which of the following conductors are permitted to be used for the push-in method of attaching conductors to a device?
a. 14 AWG solid copper b. 14 AWG stranded copper c. 14 AWG aluminum d. 14 AWG copper-clad aluminum
The Thévenin equivalent network seen by a load R0 is depicted in Figure P3.73.
Assume VT = 25V, RT = 100?, and that the value of R0 is such that maximum power is transferred to it.
Determine:
a. The value of R0.
b. The power P0 dissipated by R0.
c. The efficiency of the circuit.
