If the base of a bulb is round, how would you remove it from its socket?
What will be an ideal response?
When you remove a bulb from its socket, push it in and turn it approximately 1/8 turn counterclockwise. It will spring out of the socket when it is released.
You might also like to view...
Which term means the amount of heat that is released when a fuel is completely burned?
a. heating value b. specific gravity c. therm d. BTU
Although not visible, the development of inclusions can be expected if prior welds were improperly cleaned or had a poor contour.
Answer the following statement true (T) or false (F)
A 67° angle is called what type of angle?
Fill in the blank(s) with the appropriate word(s).
Answer the following statement(s) true (T) or false (F)
1. in a differential with a gear ratio 4:1, the drive pinion would revolve four times to cause the ring gear to rotate four times. 2. the drive pinion is adjusted with adjustment nuts. 3. most often, the condition that draws attention to trouble in the differential is noise. 4. cone clutches may be used in a positive traction differential. 5. improper tooth contact between the drive pinion and ring gear may cause a humming noise.