Twelve 14 AWG copper conductors with type RHW insulation are to be installed in conduit in an area with an ambient temperature of 110 degrees F (43 degrees C). What will be the ampacity of these conductors?
A. 4.1 amperes
B. 8.2 amperes
C. 16.4 amperes
D. 32.8 amperes
Answer: B
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. In most cases, magnification is necessary while performing the soldering process. 2. Soldering irons are not recommended for use with solder paste. 3. Where a ceramic capacitor is installed on an epoxy board, the two solder joints are subjected to very mild stresses. 4. Soldering gold with the normal solder that contains tin produces a very reliable connection. 5. When it comes to the soldering of a pierced tab terminal, it is not necessary to fill in the hole with solder.
Los tramos de tubería eléctrica en el campus debe tener una caja de derivaciones instalada después de______ grados de dobleces
a. 160 b. 180 c. 200 d. 220
One of the key developments enabling the Union to stop the Confederate thrust into the North at Antietam was
A. General Lee's dilly-dallying and half-hearted offensive thrust at Antietam Creek. B. the Union's discovery of General Robert E. Lee's battle plans. C. Lincoln's removal of General McClellan from his command. D. the use of the new repeating rifle for the first time. E. the death of Stonewall Jackson during the battle.
For the accompanying figure, if the voltage drop across the capacitor is 100V, calculate the total voltage drop across the two resistors.
What will be an ideal response?