What factors affect the number of iterations needed for a successful prototype that leads to product manufacturing?
What will be an ideal response?
? Adequate planning and the depth of the study
? How well the requirements are understood
? Availability of adequate resources and
? Design complexity including the number of parts
You might also like to view...
The bottom of an extension ladder should be set back one foot for _____
a. each foot of ladder length b. each two feet of ladder length c. each three feet of ladder length d. each four feet of ladder length
Answer the following statement(s) true (T) or false (F)
1. The Darlington amplifier circuit is one of the least used in industry. 2. The Darlington amplifier circuit can have a gain of several thousand. 3. Gain does not vary from one type of transistor to another. 4. The Darlington amplifier is used when a low gain is required. 5. Darlington amplifiers can be used to control a large amount of current to a load.
The type of WLF construction that has the largest amount of cross-grain lumber is a
A) skeleton frame. B) portal frame. C) balloon frame. D) rigid frame. E) platform frame.
If entering a line that contains flammable or hazardous vapors, the line should be _____.
a. vacuumed b. purged with nitrogen, water, air, or steam c. scraped with a pig or similar brush d. purged with oxygen