What are the steps involved in performing a double flare procedure?
What will be an ideal response?
1.First, slip the fitting onto the line.
2. Select the correct size hole in the flaring tool bar.
3. Clamp the line in the flaring tool bar. It should extend out of the bar by the width of the flaring tool adapter.
4. A threaded flaring cone and clamp are used to form the end of the tubing.
5. Insert the adapter in the end of the tubing, and tighten down on it with the threaded flaring tool until it bottoms out.
6. Remove the adapter and tighten the flaring tool against the line again to complete the flare.
You might also like to view...
Discuss how transhumance herders graze their livestock
What will be an ideal response?
Skin scrapings are used to find and identify endoparasites
A. True B. False
As the magnitude of the error signal increases, the derivative control mode ___________________________________; as the magnitude decreases, the derivative control mode ___________________________________.
Fill in the blank(s) with the appropriate word(s).
Centrifugal casting is useful for ____.
A. tubing B. pipes C. wheels D. both a and c E. all of the above