What is often a primary reference for the engine management software when determining timing and air/fuel ratio.
A. Coolant temperature.
B. Coolant system pressure.
C. Coolant level.
D. Coolant flow rate.
Answer: A
You might also like to view...
Determine the volume of traffic across the bridge.
What will be an ideal response? A bridge has been constructed between the mainland and an island. The total cost (excluding tolls) to travel across the bridge is expressed as C ? 50 ? 0.5V, where V is the number of veh/hr and C is the cost/vehicle in cents. The demand for travel across the bridge is V ? 2500 ?10C .
Liquid ethanol is a flammable fluid and can release vapors that form explosive mixtures at temperatures above its flash point at 16.6°C. In a chemical plant, liquid ethanol (cp = 2.44 kJ/kg•K,?? = 789 kg/ m3) is being transported in a pipe with an inside diameter of 5 cm. The pipe is located in a hot area with the presence of an ignition source, where an estimated 20 kW of heat is added to the ethanol. Your task as an engineer is to design a pumping system to transport the ethanol safely and to prevent fire hazard. If the inlet temperature of the ethanol is 10°C, determine the volume flow rate that is necessary to keep the temperature of the ethanol in the pipe below its flash point.
At the time of the Renaissance, the governments of most of the northern Italian states were
a. hereditary monarchies. b. feudal lordships. c. communes. d. under the control of the papacy.
The six reasons sensors are used could be sumarized as: protect humans and machines from harm, for part identification and quality, for problem analysis, and to produce the fastest possible production
Indicate whether the statement is true or false