Technician A says that a MacPherson strut typically does not include the spring as part of the strut assembly. Technician B says that a modified strut typically does not include the spring as part of the strut assembly. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
B
You might also like to view...
Answer the following statement(s) true (T) or false (F)
1. In the accompanying figure, the pressure tank switch pilot device determines when the motor is energized and de-energized by energizing and de-energizing the control coil.
2. In the accompanying figure, all the stop and start pushbuttons must be wired in parallel.
3. In the accompanying figure, the control circuit diagram uses an eleven-pin, triangle based ice cube relay.
4. In the accompanying figure, the control circuit uses a relay in place of auxiliary contacts to operate auxiliary contact-controlled status indicator lamps.
5. In the accompanying figure, the pin-out information for the buttons is to the left of the diagram.
The caster angle on a truck is measured to be 2°10'. The angle should be 2°±0.25°. Is the caster within specifications?
What will be an ideal response?
The A7 test includes what subject material?
A) Electrical systems B) Heating and air conditioning C) Engine repair D) Engine performance
When collar beams (ties) are needed to brace rafters, they are installed on _____ rafter
A) every B) every other C) every third D) every fourth