Cables routed through bored holes in framing members must maintain a distance from the nearest edge of not less than _____.
a. 1/4" (6 mm)
b. 1/2" (13 mm)
c. 1-1/4" (32 mm)
d. 2" (50 mm)
c. 1-1/4" (32 mm)
Trades & Technology
You might also like to view...
Shunt controllers regulate charge current by diverting current away from the ___________ by shorting the charging source output.
Fill in the blank(s) with the appropriate word(s).
Trades & Technology
Describe the hammer-off-dolly repair technique.
What will be an ideal response?
Trades & Technology
The linear feet of window casing (not including waste) needed to trim two 3'-8" × 5'-0" interior windows
using the picture-frame method is approximately _____. a. 30' b. 40' c. 60' d. 70
Trades & Technology
Pin 8 is connected to ____________________.
Fill in the blank(s) with the appropriate word(s).
Trades & Technology