In the above diagram if a is 8 bricks and b is 9 bricks, what is the measurement of b to the nearest whole inch?
What will be an ideal response?
72
You might also like to view...
The glass obtained from the float-glass process without any further treatment is called ________.
A) plate glass. B) annealed glass. C) heat-strengthened glass. D) sheet glass. E) tempered glass.
Beth harvested 421 acres of corn with an 8-row combine with a 30- inch-row header. She traveled 4.6 miles per hour and burned 1.4 gallons of diesel fuel per acre. The yield per acre was 142 bushels. The harvesting efficiency average for the field was 0.80. She used a 1,100- bushel semi-trailer to move the corn to storage.
a. How many semitrailer loads were harvested? b. What is the combine harvesting capacity? Use the following formula: HC = (S × W × EFF × Y) ÷ 8:25 Where: HC is the harvesting capacity, bu/hr. S is the combine speed, mph. W is the combine harvesting width, ft. EFF is the harvesting efficiency. Y is the yield, bu/acre. c. How many days did it take to harvest the 421 acres of corn, working 12-hour days?
Which of the following could be handled by data bus communications in a current diesel engine cooling system?
A. thermostat opening B. A/C to fan-engage command C. coolant flow through heater core D. shutter cycling
Which one of the following is NOT one of the major control objectives?
A) Stability B) Produce desired transient response C) Smooth and quite operation D) System robustness E) Reduce steady state error