A non-drive-wheel bearing adjustment procedure includes a final spindle nut tightening torque of ________
A) 10 to 15 lb-ft plus 1/16 turn B) 12 to 30 lb-ft
C) 5 lb. in. D) Finger tight
D
Trades & Technology
You might also like to view...
Compared to an air handler located in a high mountain cabin, what are the airflow requirements per ton of cooling of an identical air handler installed in a seaside cottage?
a. Slightly higher b. Lower c. The same d. Much higher
Trades & Technology
In hand-set multicomponent decks, joists normally _____.
a. are laid across the stringers b. are fabricated from aluminum c. support the stringers d. are spaced a minimum of 10' apart
Trades & Technology
Calculate the input impedance for the network in Fig. 13.114 below.
 figure 1.png)
Trades & Technology
A garage owner has an oil barrel that contains 68 1/4 gallons. If sales average 11 3/8 gallons a day, how many days will the oil last?
A. 4 B. 5 C. 6 D. 7
Trades & Technology