The dimension (distance between the extension lines) is sometimes ____.
A. not marked
B. lettered atop the dimension line
C. lettered above the dimension line
D. lettered below the dimension line
Answer: C
You might also like to view...
If five No. 10 AWG current-carrying conductors are installed in a raceway where the ambient temperature is 70°F, the allowable ampacity must be _____.
a. increased by 15% b. increased by 20% c. reduced to 80% of its value d. reduced to 60% of its value
The current-limiting property of the inductor is called ____ and is symbolized by the letter ____.
a. resistance, R b. reactance, R c. resistance, X d. reactance, X
What is the purpose of the radiator shroud?
What will be an ideal response?
Figure 10-2 In Figure 10-2, measurement data about the process variable is sent to TT401, which is a ____________________.
Fill in the blank(s) with the appropriate word(s).