Two technicians are discussing a stepped ECT circuit. Technician A says that the sensor used for a stepped circuit is different than one used in a non-stepped circuit. Technician B says that a stepped ECT circuit uses different internal resistance inside the PCM. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians D) Neither technician
B
You might also like to view...
If you are feeling tired and yawning a lot while you are driving, you should:
A. Pull over and take a nap. B. Get some coffee. C. Drive faster.
The Code® requires each service entrance to be provided with a readily accessible means of disconnecting all conductors from the source. This may be either a manually operated switch or a(n) ____________________.
Fill in the blank(s) with the appropriate word(s).
Eight inches of topsoil is to be removed and stockpiled for the building in Figure 10.49. The topsoil is to be removed 10 feet back from the perimeter of the building to allow for working around the building and sloping the sides of the excavation. How many bank cubic yards of topsoil need to be removed and stockpiled?
The limits of the topsoil excavation are shown in Figure 10-4.
What will be an ideal response?
All of the following conditions can cause driveshaft vibration EXCEPT:
A. driveshaft out-of-balance B. insufficient difference in U-joint operating angles C. improper phasing D. unequal U-joint working angles