Technician A says that calibration codes may be located on the PCM housing. Technician B says that some calibration codes must be accessed by a scan tool. Which technician is correct?
A) Technician A only B) Technician B only
C) Both technicians A and B D) Neither technician A nor B
C
You might also like to view...
A variety of surface qualities and appearances can be achieved when concrete is used as a(n) _____.
a. architectural medium b. weather layer c. structural element d. surfacing material
This is the implication of up link power control.
A. Reduces overall up link interference while minimizing UE's transmit power B. Reduces the battery life of the UE because the UE may be asked to increase its transmit power level C. The gNB needs to transmit at a higher power level to compensate for any changes in the UE's transmit power level to account for any link imbalance
Describe a set of working drawings.
What will be an ideal response?
To pierce very thin metal using plasma arc cutting, hold the torch at a _____
a. 0-degree work angle b. 10-degree work angle c. 33-degree work angle d. 45-degree work angle