The smallest incremental markings on analog gauges designed for R-410A are generally:
A) 20 psi.
B) 5 psi.
C) 1 psi.
D) 10 psi.
B
You might also like to view...
Fuel lines are constructed from ________
A) Seamless steel tubing B) Nylon plastic C) Copper and/or aluminum tubing D) Both A and B
Which type of cooling mechanism is used in the most applications?
What will be an ideal response?
What drives the oil pump in a typical Allison hydromechanical transmission?
A. torque converter rear hub B. transmission input shaft C. transmission output shaft D. torque converter front hub
All of the following statements are true EXCEPT:
A. puncture repairs are done using a rubber tire plug and a patch. B. repairs to the bead area can never be safely done. C. a serious accident can result from a repair to a tire that has been run flat. D. a tire can be repaired when the puncture is between the shoulder of the tread area, called the crown, if the diameter of the puncture is less than 1/2".