When weld symbols are placed on both sides of the reference line, the welds can be made on either side of the joint.
Answer the following statement true (T) or false (F)
False
You might also like to view...
Los requisitos del NEC® que regulan las baterías para sistemas eléctricos de emergencia se tratan en el:
a. NEC® Artículo 334. b. NEC® Artículo 370. c. NEC® Artículo 430. d. NEC® Artículo 480.
Name the type of drawing is a collection of parts, each drawn separated apart using the same method.
What will be an ideal response?
The generally accepted method of connecting structural steel columns to their supporting footing or foundation walls is by welding the bottom of the column to a _______________, which is in turn fastened to the footing or wall by _______________.
Fill in the blank(s) with the appropriate word(s).
A small horizontal rectangle is e placed with the bottom length on the reference line. Inside the rectangle is the notation 9/16, above the rectangle is the notation 25°, to the right of the rectangle is the notation 12, and to the left of the rectangle is the notation 5/8. What does this welding symbol signify?
A. A series of 5/8" in diameter plug welds is to be made on the other side. The angle of the welds is to be 25°, the depth of each weld is to be 9/16", and the pitch is to be 12. B. A series of slot welds 5/8" in width is to be made on the other side. The angle of the welds is to be 25°, the depth of each weld is to be 9/16", and the pitch is to be 12. C. A series of 5/8" in diameter plug welds is to be made on the arrow side. The angle of the welds is to be 25°, the depth of each weld is to be 9/16", and the pitch is to be 12. D. A series of 9/16" in diameter plug welds is to be made on the other side. The angle of the welds is to be 25°, the depth of each weld is to be 5/8", and the pitch is to be 12. E. None of the above. This is an incorrect symbol.