Applying the bend allowance to each bend in the flat pattern ensures that ____.
A. the accurate bend angle will be adequate
B. the layout drawings which are required for fabrication and preparation of the part have a comparable bend radius variable to the other parts
C. when the material is formed into its final shape, the desired final dimensions can be achieved
D. both a and c
E. none of the above
Answer: C
You might also like to view...
Variable frequency drives intended to control the speed of motors up to 500 hp generally use ____________________.
Fill in the blank(s) with the appropriate word(s).
Circuits for controlling a two speed consequent pole motor may use contactors with three load contacts because they are more ____.
a. eco-friendly b. readily available c. economical d. spacious
If 40 grams of the strong base, NaOH, are added to 1 liter of distilled water, what would the pH of the solution be, if
a. Activity effects are neglected b. Activity effects are estimated using the Debye-Huckel approximation. What will be an ideal response?
Technician A says that coolant is normally a dark brown color. Technician B says to periodically inspect the radiator for obstructions. Which technician is correct?
A) Technician A only B) Technician B only C) Both technicians A and B D) Neither technician A nor B