Determine the reactions at the supports, the magnitude of the cable sag at joints B and E, the magnitude of the tension force in each segment of the cable, and the total length of the cable in Figure P6.1.
You might also like to view...
The moment of a force can commonly be described as its _____.
a. leverage b. power c. strength d. magnitude
Jill made a ton of 16 percent CP ration for one-fifth of the 220 sows. The ration contains 150 pounds of 25 percent CP supplement A at $15 per 50-pound bag, 50 pounds of supplement B at $18.75 per 50- pound bag, and 48 percent CP soybean meal at $485 per ton. The 1 © 2012 Cengage Learning. All Rights Reserved. May not be scanned, copied or duplicated, or posted to a publicly accessible website, in whole or in part. balance is from corn with 8.6 percent CP that she raised at a cost of $3.10 per bushel. She fed each sow 6.5 pounds per day.
a. How many sows were fed the 16 percent CP ration? b. What did the corn cost for a ton of the ration? c. What did a ton of the feed cost? d. How much did it cost to feed the sows for 28 days?
Technician ?A says that camshaft end thrust on a pushrod engine with a camshaft-driven oil pump results from resistance of oil being pumped by the oil pump. Technician B says that flat tappet camshafts are usually inspected by visually checking the wear pattern on the lobes for edge loading. Who is right?
A. Technician A only B. ?Technician B only C. ?Both A and B D. ?Neither A nor B
Technician A says that it is common for Caterpillar HEUI fuel systems to use a centrifugal type fuel transfer pump. Technician B says that a double-acting fuel subsystem transfer pump moves fuel on the push and pull strokes. Who is correct??
A. ?Technician A only B. ?Technician B only C. ?Both A and B D. ?Neither A nor B