Cylinder taper and out of round should be measured _______
A) Just below the ridge B) Near the bottom of piston travel
C) Both A and B D) Neither A nor B
C
You might also like to view...
The team should periodically conduct a(n) ______________________________ at the beginning or end of a team meeting; doing so will help resolve people's differences and reinforce good feelings.
Fill in the blank(s) with the appropriate word(s).
If the cutting tip seat or the torch head seat is damaged, ____.
A. it must be discarded B. it can be repaired using a plastic hammer C. it can be repaired using a reamer D. it can be cut apart and welded back together
Cylindricity is similar to circularity in that both ____.
A. have a radius tolerance zone B. have a cross sectional tolerance C. lie between two concentric circles D. lie between two concentric cylinders E. both b and c
A curtain air bag deploys from the front pillar and roof trim.
Answer the following statement true (T) or false (F)