A large pocket of air trapped within a system can totally stop flow. This effect is often called air ____.
a. blockage
b. plugging
c. binding
d. trapping
c. binding
You might also like to view...
The flare V-groove and flare-bevel groove symbols are used in combination with the edge weld symbol to ____________________ the welded joint.
Fill in the blank(s) with the appropriate word(s).
If the voltage on each leg to a contactor is 250 and the voltage on each leg leaving the contactor is 240 what corrective action is necessary?
a. Replace the contactor, the contacts are starting to pit, or burn. b. Have an electrician correct the voltage, 250 volts is too high. c. Clean or file down the contacts of the contactor. d. Don’t do anything, the motor is getting the proper voltage.
555 × 777 =
A) 430,235 B) 430,135 C) 431,135 D) 431,235
Technician A says that a vehicle must have new tires in order to perform a proper alignment. Technician B says that the tires should be the same size with the same tread wear in order to perform a proper alignment. Which technician is correct?